Nuts
Full Nuts
Metric Full Nuts DIN 934, BSW/BSF/UNC/UNF Full Nuts.
Half/ Lock Nuts
Metric Half Nuts DIN439, BSW/BSF/UNC/UNF Lock Nuts.
Nyloc Nuts
Metric, BSW/UNC/UNF/BSF. Secure, vibration-resistant. DIN 982/985
Wing Nuts
UNC/UNF/BSW - Multiple finishes, and sizes made to DIN315.
Roofing Nuts
Weather resistant, DIN 562 range of sizes and matching roofing bolts.
Dome Nuts
DIN1587 Enhanced aesthetics with robust, protective fastening.
Cap Nuts
Smooth finish, added protection with reliable security. DIN917
BA Nuts
Precision small size threading DIN934
Square Nuts
Strong grip and stability, ideal for robust fastening. DIN 557.
Nylon Dome Nuts
Lightweight, electrical resistance properties. DIN986
Grade 10/12 Full Nuts
DIN 934 Hardened for automotive /structural / high temperature.
Castle / Slotted Nuts
Secure fastening with provision for cotter pin safety. DIN 935.
Flange Nuts
Increased surface grip and stability via the wider bottom. DIN 6923.
Left Hand Nuts
Left Hand Nuts, BSW, BSF, UNC/UNF Left Hand Lock Nuts. DIN 934.
Grade 10 Nylon Nuts
Metric, BSW/BSF/UNC/UNF. Secure, vibration-resistant. DIN985.
Fine Pitch Full Nuts
Precision Fine Pitch Full Nuts, BSW, BSF, UNC/UNF Full Nuts. DIN934.
Brass Nuts
Great for high temperature applications. DIN 934.
PAL Nuts
Spring steel which allows them to distort under load. DIN 7967.
Grade 12 Full Nuts
Hardened Nuts BSW, BSF, UNC and UNF Nuts. DIN 934.
Fine Pitch Lock Nuts
Precision Fine Pitch Lock Nuts, BSW, BSF, UNC/UNF Full Nuts. 439B.
Stainless Nuts
For high corrosion resistance. Full range of types available. DIN 934.
Vee Lock Nuts
AKA Stover Nuts, Internal Flange & Serrated Bottom. DIN 980.
Weld Nuts
Designed Specifically for Welding Applications. DIN 929.
Fine Pitch Nyloc Nuts
BSW/BSF/UNC/UNF Anti-Vibration. DIN 985.
Bolts
HT Bolts
High-tensile strength for demanding load-bearing. DIN 931.
8.8 Fine Pitch Bolt Sets
High-strength threads for precise, reliable fastening. DIN 961.
Rilsan Bolt/Nut/Washer
Coated with anti-corrosion, wear-resistant Rilsan finish. DIN 601.
Socket Caps
Designed for flush, secure, and clean installations. DIN 912.
HT Bolt Sets
High-tensile strength for demanding load-bearing. DIN 933.
10.9 Fine Pitch Sets
High-strength threads for precise, reliable fastening. DIN 961.
Flange Sets mm / imp
Flange head for even distribution & reduced slippage. DIN 6921.
Socket CSK
Low-profile, flush fit with Allen-wrench engagement. DIN 7991.
10.9 Bolts
For demanding applications and superior load-bearing. DIN 931.
12.9 Fine Pitch Sets
High-strength threads for precise, reliable fastening. DIN 912.
Cup Square Bolts
Secure fastening with a square neck for anti-rotation. DIN 603.
Socket Sets
For precise fastening in varied applications. DIN 916.
10.9 Bolt Sets
high-grade fastening for optimal load-bearing applications. DIN 931.
Mild Steel Bolts
Durable fasteners for versatile applications. DIN 603/934
Roofing Bolt / Nut
Secure, weather-resistant roof installations. DIN 934 / 562.
Socket Buttons
Rounded head, deep socket for reliable fastening. ISO 7380.
12.9 Bolts
high-grade fastening for optimal load-bearing applications. DIN 931.
Mild Steel Sets
Durable fasteners for versatile applications. DIN 933.
Hex Coach Screws
Heavy-duty wood fastening with hexagonal grip head. DIN 571.
Hex Keys
Tool for engaging hexagonal socket fasteners with ease. DIN 911.
12.9 Bolt Sets
high-grade fastening for optimal load-bearing applications. DIN 931.
UNC / UNF Bolts
Unified thread standards ensuring precise fit and robust.
Chipboard Screws
Tapered, sharp threads for firm chipboard fastening. DIN 7505.
Cotter Pins
Secure mechanical components and prevent loosening. DIN 94.
8.8 Fine Pitch Bolts
Enhanced threading for tighter, precise fastening. DIN 931.
UNC / UNF Bolt Sets
Unified thread standards ensuring precise fit and robust.
Drywall Screws
Sharp-pointed, coarse thread for secure fix. DIN 18182/50021/50942
Machine Screws
Precision thread for consistent metal-metal fastening. DIN 965.
10.9 Fine Pitch Bolts
Enhanced threading for tighter, precise fastening. DIN 961.
U Bolts
U-shaped for securing pipes, conduits, or anchoring. DIN 3570.
Self Tappers
Sharp, self-drilling screws metal or wood penetration. DIN 7981.
Engineer Studs
Double-ended thread fasteners for assemblies. DIN 938/939.
12.9 Fine Pitch Bolts
Enhanced threading for tighter, precise fastening. DIN 931.
Flange Bolts mm / imp
Flange head for even distribution & reduced slippage. DIN 6921.
Wood Screws
Tapered, sharp thread for reliable wood-wood fastenings. DIN 7997
Studding
Threaded rod for versatile fastening & extension. DIN 976.
Washers
Form A Washers
Flat washers for optimal load spread and joint integrity. DIN 125.
SQ Spring
Square section for optimal tension and fit. DIN 9780.
BS3410 Table 3 Light
Compliant with tolerances for lightweight applications.
Taper 5˚ D Shape
Diagonal for precise alignment & angular seating. DIN 434.
Form B Washers
Slightly thinner ensuring tight, close-fitting joints. DIN 125.
Rect Spring Washer
Rectangular section, split design for consistent tension. DIN 127B.
BS3410 Table 3 Heavy
Designed for high-load applications specific tolerances.
Taper 6½˚ D Shape
Diagonal for precise alignment & angular seating. DIN 434.
Form C Washers
Thin flat washers for limited-space applications. DIN 125.
Int Serrated Proof
Internal serrated for enhanced grip and anti-rotation. DIN 6797 J
BS3410 Table 4 Light
Precision-crafted, set tolerances for lighter applications.
Taper 5˚ Sq Shape
Square cut with a 5˚ taper for exact alignment/seating. DIN 434.
Form D Washers
Slim with a larger outer diameter for broader load dispersion. DIN 125.
Ext Serrated Proof
External serrated lock washer for superior fastener grip DIN 6797 J.
BS3410 Table 4 Heavy
Tailored for high-stress; meeting stringent tolerances.
F436 Washers
Hardened flat washers for structural steel bolting.
Form E Washers
BS4320 washer in a range of materials & coatings. DIN 125.
Int Serrated Proof
Internal serrated lock washer for superior fastener grip. DIN 6798 A.
BS3410 Table 1 Small
Specific tolerances for compact applications.
ASA B27.1 1965 REG
Cut and deformed to prevent loosening of the assembly.
Form F Washers
Chamfered for bearing surfaces with angular load. DIN 125.
Ext Serrated Proof
External serrated lock washer for superior fastener grip. DIN 6798 A.
BS3410 Table 2 Large
Specific tolerances for compact applications.
ASA B27.1 1965 HVY
Washers conforming to American Standards Association.
Form G Washers
Broad with a smaller inner diameter for precise fitting over bolts. DIN 125.
Double Coil Rect Spring
Dual-coil rectangular spring for high tension/security. DIN 127.
BS3410 Table 5
Engineered to meet standards for heavy-duty applications.
Phosphor Bronze
Corrosion-resistant, high-strength washers.
Sq Plate Washers
Sturdy Square washer, distributing load, strong connections. DIN 436.
Repair Washers
Fixing and restoring strength to damaged areas. DIN 9021.
BS3410 Table 6
Washers designed for specialized applications with set tolerances.
Brass Washer
Corrosion-resistant, conductive & decorative use. DIN 125.
Thru Hard Washers
Heat-treated, hardened for durable & reliable fastening. DIN 6916
Nut Faced Washers
Fit snugly against nuts, enhancing load distribution. DIN 6923.
BS3410 Table 7
For specific requirements & specialized applications.
Stainless Washers
Corrosion-resistant, durable and long-lasting fastening. DIN 125.
Fixings & Resin
CE Through Bolts
CE Approved. BZP, galvanised and A4 stainless steel.
Resin Capsules
Epoxy acrylate capsules. Available as either spin or hammer version.
Concrete Anchor
Hex, hex flange, csk, pan, hook, eye and ZYP. Available in A4 stainless.
Metal Cavity Anchor
Designed to provide a secure and solid fixing in cavity walls.
Standard Through Bolts
Standard performance product. BZP only available.
Resin Accessories
Nozzles, blow pumps, brushes, mesh sleeves, site kits, etc
KF Masonry Screw
Multi purpose with HiLo thread, rounded csk and T30 star drive.
Plasterboard Screws
Solid Fixing to/behind plaster board. Supplied with Screws.
CE Shield Anchors
CE Approved. High load bearing, only available bolt head, ZYP.
Resin Studs
Chisel point, available in ZYP, galv and A4 stainless steel, any size.
Masonry Screw
Countersunk and hex head, Blue Ruspert finish.
Universal Plug
Fixes into any base material, solid or hollow.
Standard Shield Anchors
Increased surface grip and stability via the wider bottom. DIN 6923.
Sleeve Anchors
New patent design, crush zone version for high performance.
Plastic Plugs
Available small packed on sprue or bulk packed.
Spring Toggle Fixings
Plasterboard Anchor. Supplied with pan head m/c.
Heavy Duty Anchors
Available with CE Approval, bolt, stud or csk head.
Hammerset Anchors
Available in either ZYP or A4 stainless steel.
Nylon Plugs
Available packed or bulk. Attaching items to solid masonry.
Zamac Nail In
Economical nail-in anchor with carbon steel nail.
CE Resin Cartridgs
Vinylester styrene free resin, with CE approval..
Lipped Hammerset
For enhanced performance and aesthetics, available in ZYP
Nylon Hammer Fixing
Csk or large mushroom head. ZYP or stainless.
Ceiling Anchor
Steel fire rated fixing. For use in overhead applications.
WRAS Resin Cartridges
Pure epoxy for the strongest bond, for rebar & structural connections.
Brass Anchors
Expansion Anchor used in any base material with bolt/set/screw.
Nylon Frame Fixing
Csk pozi, csk torx or hexagon head ZYP. Available in stainless steel.
Wire Hanger
Ideal for suspended ceilings and partitioning.
Std. Resin Cartridges
Polyester system with or without styrene and epoxy acrylate.
Scaffold Ring Bolts
Made in the UK to BS5973:1993.
Window Frame Anchor
Nylon or steel version available.
Ex Insulation Supports
Nylon support with glass reinforced expander pin.
Pourable Resin Systems
Vinylester styrene free resin, with CE approval..
Hooks & Eyes
Cold forged. Sizes M6 to M12 available, forged pattern ZYP.
Express Nail
suitable for all kinds of concrete and masonry substrate materials.
Insulation Supports
Available in either nylon or A2 stainless steel.
KM45 LV System
Low velocity cartridge tool Inc. nails, cartridges, clips & spare parts.
Pipe Clamps & Hose Clips
M8/M10 bossed pipe clamps and assorted sizes hose clamps.
Wood Drill Bits
Auger, flat wood bits, forstener, brad points and countersinks.
Self Tapping Screws
Designed for flush, secure, and clean installations. DIN 912.
KMN Nail System
KMN System - Nail with 12mm steel washer.
Galvanised Banding
12/17/25mm wide galvanised banding, 1mm thick, 10mm long.
Steel Drill Bits
Rolled, ground, cobalt, long, short, hole saws, kits & countersinks.
Brass Woodscrews
Csk, round head or raised head. All slotted
AGN Nail System
Nail with 8mm steel and 9mm nylon washer.
U Clamps
Perfect for pipework applications & for sitting around fence posts.
Jig & Sabre Blades
Secure fastening with a square neck for anti-rotation. DIN 603.
Security Screws
Tamper proof screws inc clutch head, with a self-tap option.
Assorted Kits and Cases
Assorted kit packs, resin, KF screws, sleeve anchors. Perfect for site.
Sealant
Sanitary grade silicone, gap and panel adhesive, superglues, etc
Screwdriver Bits
Slotted, pozi, torx in a variety of lengths and kits.
Black Japanned Woodscrews
Secure, weather-resistant roof installations. DIN 934 / 562.
Prebena Tool & Nail System
Award winning portable nailer and plastic collated nails.
PU Foam
Hand held & gun grade. B1, B2 and B3 fire resistant available
Screw Cap & Cups
Assorted sizes/colours in plastic. Nickel plated/brass surface cups.
Chrome Dome Mirror Screw
Aesthetic chrome caped screw in a variety of lengths and coatings.
Nails for Gas Machines
Suits most modern gas powered nail machines.
Cable Clips
Available in flat white or round white.
Self Drilling Screws
Csk/hex head for light/heavy duty section steel.
Stainless Steel Screws
Secure corrosive resistant and aesthetic screws.
Brads for Gas Machines
Suits most modern gas powered finishing brad nail machines.
Cable Ties
Range of sizes and thickness and multiple colours.
Chipboard Screws
Larger threads for secure fixing to chipboard or similar.
Raised Head Chrome
Raised dome head, great for aesthetic or wood to wood uses.
Nails, Brads and Staples for Air Machines
16 and 18 gauge finishing brads, coil nails, strip nails and staples.
Sanitary Fixings
Specialist Basin and pedestal fixings. Prepack bags.
Drywall Screws
Black and BZP self tapping. BZP self drilling. Black collated.
Flange Pozi Screws
Self tapping with flange for spread loads.
Primatech Flooring Nails
Available in 38mm or 50mm. For manual and pneumatic machines.
Hammer Drill Bits
Drill into harder materials, including stone & concrete.
Decking Screws
Tapered, sharp thread for reliable wood-wood fastenings.
Wafer Head Screws
Low profile screws with Ph2 head for metal to metal fixing.
Staples
Large range of sizes and types to fit most guns.
Timber Connectors
Increase bolt performance in timber. They conform to BS EN 912
Snap Hooks
Easy to link to chain or rope. Large range of sizes, types & finishes.
Eye Bolts
Perfect for anchoring cables/ropes.
Wire Rope Grips
Clips for a quick and easy way to create eyelets in wire rope.
D Shackles
Primarily used for lifting heavy loads. Marine Grade.
Ridge Tile Nails
Extra long. Used for fixing sheets to tiles or sheets to timber rafters.
Lynch Pins
Prevent a part from sliding off an axle & securing implements.
Masonry Nails
High force designed for use in brick, concrete and concrete blocks.
R Clips
To secure the ends of round shafts such as axles & clevis pins.
Copper Nails & Crampions
Long lasting, rust resistant and tough. Ideal outdoors.
Cladding Pins
UV stable, Suitable for fixing fascias, soffits etc.
